注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

yangzh691216的博客

成功止于信念

 
 
 

日志

 
 

PROE3.0配置文件  

2012-03-24 19:21:01|  分类: PROE专区 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |
PROE3.0配置文件

!设置背景颜色BLUE蓝色

system_colors_file D:\My Documents\start_proe\blue.scl

!=======================

bell no

display_axes no

dxf_out_comments yes

dxf_out_drawing_scale yes

dxf_out_scale_views yes

dxf_out_stroke_text yes

gtol_dim_placement on_bottom

highlight_new_dims yes

info_output_mode choose

intf_in_arclength_reparam yes

make_parameters_from_fmt_tables no

mark_approximate_dims no

menu_font arial, bold

native_kbd_macros yes

prehighlight yes

save_drawing_picture_file embed

set_trail_single_step yes

show_axes_for_extr_arcs yes

sketcher_dec_places 2

sketcher_refit_after_dim_modify no

sketcher_save_preview_image yes

spin_center_display yes

spin_with_part_entities yes

tol_display no

topobus_enable yes

use_pre_wildfire_text_font no

web_enable_javascript on

activate_sketch_with_dflt yes

pro_unit_length unit_mm

default_dec_places 2

allow_anatomic_features yes

model_tree_start yes

intf_out_layer part_layer

feature_create_auto_begin yes

display_coord_sys no

text_height_factor 50

save_model_display shading_lod

sketcher_blended_background yes

sketcher_lock_modified_dims yes

enable_absolute_accuracy yes

accuracy_lower_bound .0001

allow_move_view_with_move yes

atb_auto_check_on_activate on

atb_auto_check_on_update on

autobuildz_enabled yes

cmdmgr_trail_output yes

color_ramp_size 100

create_temp_interfaces yes

!default_draw_scale 1 (二维图比例1:1)

display_full_object_path yes

enable_tree_indep yes

feature_create_auto_ok yes

file_open_default_folder working_directory

flip_arrow_scale 2

iges_out_dwg_color yes

intf_out_auto_layer_ids yes

model_notes_as_labels yes

prehighlight_tree yes

pro_unit_mass UNIT_GRAM

pro_unit_sys mmns

show_all_mold_layout_buttons yes

sketcher_undo_reorient_view yes

spin_rate_zoom_sensitive yes

visible_message_lines 1

windows_scale 1

all_tmp_rmv_srf_feat yes

set_menu_width 10

!-------------自动BOM表-------------------------------------------------

bom_format D:\My Documents\start_proe\COMPANY.FMT

!------------工程图打印-------------------------------------------------

use_8_plotter_pens yes

use_software_linefonts yes

pen_table_file D:\My Documents\start_proe\table.pnt

pro_plot_config_dir D:\My Documents\start_proe\ms_print_mgr.pcf

!定义缺省的绝对零件精度

default_abs_accuracy 0.0001

!-------------------------

template_designasm D:\Program Files\proeWildfire 3.0\templates\start.asm

!web_browser_homepage D:\Program Files\proeWildfire 3.0\html\chinese_cn\proe\1.html

template_solidpart D:\Program Files\proeWildfire 3.0\templates\custom.prt

template_mfgmold D:\Program Files\proeWildfire 3.0\templates\mmns_mfg_mold.mfg

trail_dir D:\temp\trail

trail_delay 1

dxf_export_mapping_file D:\My Documents\start_proe\dxf_export.pro

mdl_tree_cfg_file D:\My Documents\start_proe\tree.cfg

pro_font_dir D:\Program Files\proeWildfire 3.0\text\fonts

!pro_library_dir C:\ptc\objlib_WF

drawing_setup_file D:\Program Files\proeWildfire 3.0\text\GB.dtl

pro_colormap_path D:\My Documents\start_proe\color.map

pro_material_dir D:\My Documents\start_proe\Materials

pro_editor_command C:\WINDOWS\system32\notepad.exe

browser_favorite D:\My Documents\start_proe\data

browser_favorite D:\My Documents\start_proe\mold

browser_favorite D:\My Documents\start_proe\exercise

!菜单语言设定,中英对照为BOTH,英文为NO,全中文为YES。

menu_translation BOTH

msg_translation yes

help_translation yes

!=======================

!标准件库

!pro_material_dir D:\MONLibs\Materials

!pro_library_dir D:\MONLibs\

!pro_catalog_dir D:\MONLibs\

!PROTKDAT        D:\MONLibs\protk.dat

!save_objects changed

!---------符号库---------------------------------------------------------------------

pro_symbol_dir D:\My Documents\start_proe\data\symbols

!------------proe映射键--------------------------------------------------------------

mapkey $F1 @MAPKEY_LABEL(新建文件);~ Command `ProCmdModelNew`;

mapkey $F2 @MAPKEY_NAME(设置工作目录);~ Command `ProCmdSessionChangeDir`;

mapkey $F3 @MAPKEY_NAME继承 ;~ Command `ProCmdUtilAppPrt`  `Legacy`;

mapkey $F4 @MAPKEY_NAME标准;~ Command `ProCmdUtilAppPrt`  `Standard`;

mapkey $F5 @MAPKEY_LABEL线框显示;~ Command `ProCmdEnvMdlDisp`  `Wireframe`;

mapkey $F6 @MAPKEY_LABEL隐藏线显示;~ Command `ProCmdEnvMdlDisp`  `Hidden line`;

mapkey $F7 @MAPKEY_LABEL无隐藏线显示;~ Command `ProCmdEnvMdlDisp`  `No hidden`;

mapkey $F8 @MAPKEY_LABEL着色显示;~ Command `ProCmdEnvMdlDisp`  `Shading`;

mapkey $F9 @MAPKEY_LABEL基准面开关;~ Command `ProCmdEnvDtmDisp` 0;

mapkey $F10 @MAPKEY_LABEL基准轴开关;~ Command `ProCmdEnvAxisDisp` 0;

mapkey $F11 @MAPKEY_LABEL基准点开关;~ Command `ProCmdEnvPntsDisp` 0;

mapkey $F12 @MAPKEY_LABEL基准座标开关;~ Command `ProCmdEnvCsysDisp` 0;

!-------视图显示---------------------------------------------------------------

mapkey 0 @MAPKEY_LABEL模形树开关;~ Activate `main_dlg_cur` `resizer_button_1`1;

mapkey 1 @MAPKEY_LABEL主视图;~ Command `ProCmdViewNamePick` 1 ;\

mapkey(continued) ~ Select `nameviewlist` `nv_list`1  `FRONT`;

mapkey 2 @MAPKEY_LABEL背视图;~ Command `ProCmdViewNamePick` 1 ;\

mapkey(continued) ~ Select `nameviewlist` `nv_list`1  `BACK`;

mapkey 3 @MAPKEY_LABEL左视图;~ Command `ProCmdViewNamePick` 1 ;\

mapkey(continued) ~ Select `nameviewlist` `nv_list`1  `LEFT`;

mapkey 4 @MAPKEY_LABEL右视图;~ Command `ProCmdViewNamePick` 1 ;\

mapkey(continued) ~ Select `nameviewlist` `nv_list`1  `RIGHT`;

mapkey 5 @MAPKEY_LABEL仰视图;~ Command `ProCmdViewNamePick` 1 ;\

mapkey(continued) ~ Select `nameviewlist` `nv_list`1  `BOTTOM`;

mapkey 6 @MAPKEY_LABEL俯视图;~ Command `ProCmdViewNamePick` 1 ;\

mapkey(continued) ~ Select `nameviewlist` `nv_list`1  `TOP`;

mapkey 7 @MAPKEY_NAME层显示 ;~ Command `ProCmdViewLyrs` 1;

mapkey 8 @MAPKEY_NAME模型树显示;~ Command `ProCmdViewLyrs` 0;

mapkey p @MAPKEY_LABEL上一视图; ~ Command `ProCmdViewPrev`;

mapkey cx @MAPKEY_LABEL颜色及外观;~ Command `ProCmdViewAppearances`;

!--------------------------------------------------------------------------------

mapkey ff @MAPKEY_LABEL(拉伸实体)solid cut extrude;~ Command `ProCmdFtExtrude` ;\

mapkey(continued) ~ Activate `main_dlg_cur` `maindashInst0.remove_material_cb`1 ;\

mapkey(continued) ~ Activate `main_dlg_cur` `chkbn.extrev_1_placement.0`1 ;\

mapkey(continued) ~ Activate `extrev_1_placement.0.0` `PH.Sketch`;

mapkey fd @MAPKEY_LABEL(拉伸曲面)surface extrude;~ Command `ProCmdFtExtrude` ;\

mapkey(continued) ~ Select `main_dlg_cur` `maindashInst0.solid_surf_rg`1  `Surface`;\

mapkey(continued) ~ Activate `main_dlg_cur` `chkbn.extrev_1_placement.0`1 ;\

mapkey(continued) ~ Activate `extrev_1_placement.0.0` `PH.Sketch`;

mapkey gg @MAPKEY_LABEL(旋转实体)solid revolve;~ Command `ProCmdFtRevolve` ;\

mapkey(continued) ~ Activate `main_dlg_cur` `chkbn.revolve_1_placement.0`1 ;\

mapkey(continued) ~ Trigger `revolve_1_placement.0.0` `PH.section_select_list` `0`;\

mapkey(continued) ~ Trigger `revolve_1_placement.0.0` `PH.section_select_list` ``;\

mapkey(continued) ~ Activate `revolve_1_placement.0.0` `PH.Sketch`;

mapkey gf @MAPKEY_LABEL(旋转曲面)surface revolve;~ Command `ProCmdFtRevolve` ;\

mapkey(continued) ~ Select `main_dlg_cur` `maindashInst0.solid_surf_rg`1  `Surface`;\

mapkey(continued) ~ Activate `main_dlg_cur` `chkbn.revolve_1_placement.0`1 ;\

mapkey(continued) ~ Activate `revolve_1_placement.0.0` `PH.Sketch`;

mapkey b @MAPKEY_LABEL(拔模); ~ Command `ProCmdDraft`;

mapkey d @MAPKEY_LABEL(倒圆角)round;~ Command `ProCmdRound`;

mapkey w @MAPKEY_NAME倒角;~ Activate `main_dlg_cur` `ProCmdChamferEdge.d_feat`;

mapkey k @MAPKEY_NAME孔 ;~ Command `ProCmdHole`;

mapkey he @MAPKEY_LABEL(抽壳)shell;~ Command `ProCmdShell`;

mapkey va @MAPKEY_LABEL(扫描伸出项)solid sweep;~ Command `ProCmdProtSwpSld`;

mapkey vb @MAPKEY_LABEL(扫描曲面)surface sweep;~ Command `ProCmdSurfSweep`;

mapkey vc @MAPKEY_LABEL(扫描切口)solid cut sweep;~ Command `ProCmdCutSwpSld`;

mapkey vd @MAPKEY_LABEL(混合伸出项)solid blend;~ Command `ProCmdProtBlendSld` ;\

mapkey(continued) #DONE;

mapkey ve @MAPKEY_LABEL(混合曲面)surface blend;~ Command `ProCmdSurfBlend` ;\

mapkey(continued) #DONE;

mapkey vf @MAPKEY_LABEL(混合切口);~ Command `ProCmdCutBlendSld`;

mapkey vs @MAPKEY_LABEL(扫描混合);~ Command `ProCmdFtSweptBlend`;

mapkey vx @MAPKEY_LABEL(可变剖面扫描);~ Command `ProCmdFtLoft`;

mapkey vg @MAPKEY_LABEL(边界混合)surface boundary;~ Command `ProCmdFtBndBlend`;

mapkey vh @MAPKEY_LABEL(造形)style;~ Command `ProCmdFreestyle`;

!---------编辑---------------------------------------------------------------------

mapkey xa @MAPKEY_NAME(填充);~ Command `ProCmdFtFill` ;\

mapkey(continued) ~ Activate `main_dlg_cur` `chkbn.fill_reference.0`1 ;\

mapkey(continued) ~ Trigger `fill_reference.0.0` `PH.SketchList` `0`;\

mapkey(continued) ~ Trigger `fill_reference.0.0` `PH.SketchList` ``;\

mapkey(continued) ~ Activate `fill_reference.0.0` `PH.Sketch`;

mapkey xb @MAPKEY_NAME(相交);~ Command `ProCmdFtIntersect`;

mapkey xc @MAPKEY_NAME合并;~ Command `ProCmdFtMerge`;

mapkey xd @MAPKEY_NAME投影;~ Command `ProCmdFtProject`;

mapkey xe @MAPKEY_LABEL(编辑修剪)surface trim use other;~ Command `ProCmdFtTrim`;

mapkey xf @MAPKEY_NAME(延伸);~ Command `ProCmdFtExtend`;

mapkey xg @MAPKEY_LABEL(偏距曲面)surface offset;~ Command `ProCmdFtOffset`;

mapkey xh @MAPKEY_NAME(加厚);~ Command `ProCmdFtThicken`;

mapkey xn @MAPKEY_NAME(实体化); ~ Command `ProCmdFtPatch`;

mapkey xv @MAPKEY_NAME(移除);~ Command `ProCmdFtRemoveSrf`;

mapkey xm @MAPKEY_LABEL(镜像)mirror;~ Command `ProCmdFtMirror`;

mapkey xs @MAPKEY_NAME(阵列);~ Command `ProCmdFtPattern`;

mapkey un @MAPKEY_LABEL(编辑设置)setup units;~ Command `ProCmdMmSetup`;

mapkey mn @MAPKEY_LABEL(特征操作)featrue operations;;\

mapkey(continued) ~ Command `ProCmdMmFeatOper`;

mapkey ax @MAPKEY_NAME(再生模型);~ Command `ProCmdRegenPart`;

!----------------草绘-----------------------------------------------------------

mapkey cf @MAPKEY_LABEL(草绘)sketch curve;~ Command `ProCmdDatumSketCurve`;

mapkey ch @MAPKEY_NAME取消草绘; ~ Command `ProCmdSketQuit` ;\

mapkey(continued) ~ FocusIn `UI Message Dialog` `no`;~ FocusIn `UI Message Dialog` `yes`;\

mapkey(continued) ~ Activate `UI Message Dialog` `yes`;

mapkey sg @MAPKEY_LABEL(直线)sketch line;~ Command `ProCmdSketLine` 1;

mapkey sc @MAPKEY_LABEL(中心线)sketch center line;\

mapkey(continued) ~ Command `ProCmdSketCenterline` 1;

mapkey sw @MAPKEY_LABEL(矩形)sketch rectangle;\

mapkey(continued) ~ Command `ProCmdSketRectangle` 1;

mapkey cc @MAPKEY_LABEL(圆)sketch circle;~ Command `ProCmdSketCenterPoint` 1;

mapkey ct @MAPKEY_LABEL(同心圆)sketch circle concentric;\

mapkey(continued) ~ Command `ProCmdSketCircCon` 1;

mapkey cr @MAPKEY_LABEL(椭圆)sketch ellipse;~ Command `ProCmdSketEllipse` 1;

mapkey ca @MAPKEY_LABEL(三点相切端)sketch arc;~ Command `ProCmdSket3Point` 1;

mapkey cb @MAPKEY_LABEL端点弧sketch center and end arc;\

mapkey(continued) ~ Command `ProCmdSketCenterEnds` 1;

mapkey ce @MAPKEY_LABEL(同心弧)sketch eoncentric;\

mapkey(continued) ~ Command `ProCmdSketArcConc` 1;

mapkey cw @MAPKEY_NAME(锥形弧);~ Command `ProCmdSketConic` 0;

mapkey cd @MAPKEY_NAME圆角;\

mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdSketCircular.tbFill`1;

mapkey cv @MAPKEY_LABEL(样条)sketch spline;~ Command `ProCmdSketSpline` 1;

mapkey cz @MAPKEY_NAME草绘点;\

mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdSketPoint.tbCsys`1;

!---------------------草绘编辑------------------------------------------

mapkey sa @MAPKEY_NAME选取边;\

mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdSketProject.tbEdge`1;

mapkey sb @MAPKEY_LABEL偏距线;\

mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdSketOffset.tbEdge`1;

mapkey sd @MAPKEY_LABEL标注尺寸;\

mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdSketDimension.sket_r`1;

mapkey se @MAPKEY_NAME修改尺寸;~ Command `ProCmdEditModify` 1 ;\

mapkey(continued) ~ FocusOut `ui_dynmod` `in.0`;

mapkey sv @MAPKEY_NAME约束;\

mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdSketConstrain.sket_r`1;

mapkey sq @MAPKEY_NAME文字;~ Activate `main_dlg_cur` `ProCmdSketText.sket_r`1;

mapkey te @MAPKEY_LABEL分割;\

mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEditSplit.tbTrim`1;

mapkey tr @MAPKEY_LABEL裁减;\

mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEditDelSeg.tbTrim`1;

mapkey ex @MAPKEY_LABEL延伸相交;\

mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEditCorner.tbTrim`1;

mapkey / @MAPKEY_NAME草绘镜像;\

mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEditMirror.tbMirr`1;

mapkey . @MAPKEY_NAME选取项目;\

mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEditOneByOne.sket_r`0;

mapkey ; @MAPKEY_NAME(选取链); ~ Command `ProCmdEditChain`;

mapkey q @MAPKEY_NAME二维定向 ;\

mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewSketchView.sket`;

mapkey , @MAPKEY_NAME打钩;~ Activate `main_dlg_cur` `ProCmdSketDone.sket_r`;

!-----------------分析-----------------------------------------------------------

mapkey jh @MAPKEY_LABEL长度;~ Command `ProCmdNaMeasureLength`;

mapkey jk @MAPKEY_LABEL角度;~ Command `ProCmdNaMeasureAngle`;

mapkey jl @MAPKEY_LABEL距离;~ Command `ProCmdNaMeasureDistance`;

mapkey y @MAPKEY_LABEL圆;~ Command `ProCmdNaMeasureDiameter`;

!--------------------------------------------------------------------------------

mapkey jm @MAPKEY_LABEL(基准面)maker datume;~ Command `ProCmdDatumPlane`;

mapkey jn @MAPKEY_LABEL(基准轴)maker datume;~ Command `ProCmdDatumAxis`;

mapkey jb @MAPKEY_LABEL(基准曲线)maker datume;~ Command `ProCmdDatumCurve`;

mapkey jv @MAPKEY_NAME(基准点);~ Command `ProCmdDatumPointGeneral`;

mapkey jc @MAPKEY_NAME(基准坐标系);~ Command `ProCmdDatumCsys`;

mapkey jx @MAPKEY_NAME(偏移坐标点);~ Command `ProCmdDatumPointOffsetCSys`;

!---------------------------------------------------------------------------------

mapkey = @MAPKEY_NAME面组选取;~ Open `main_dlg_cur` `Sst_bar.filter_list`;\

mapkey(continued) \~ Close `main_dlg_cur` `Sst_bar.filter_list`;\

mapkey(continued) \ ~ Select `main_dlg_cur` `Sst_bar.filter_list`1  `4`;

mapkey - @MAPKEY_NAME智能选取;~ Open `main_dlg_cur` `Sst_bar.filter_list`;\

mapkey(continued) \ ~ Close `main_dlg_cur` `Sst_bar.filter_list`;\

mapkey(continued) \ ~ Select `main_dlg_cur` `Sst_bar.filter_list`1  `0`;

mapkey ` @MAPKEY_NAME几何选取;~ Open `main_dlg_cur` `Sst_bar.filter_list`;\

mapkey(continued) \ ~ Close `main_dlg_cur` `Sst_bar.filter_list`;\

mapkey(continued) \ ~ Select `main_dlg_cur` `Sst_bar.filter_list`1  `2`;

!-----------------------------------------------------------------------------------

mapkey ss @MAPKEY_LABEL自文件;~ Command `ProCmdModelImpAppendNew`;

mapkey aa @MAPKEY_LABEL复制几何;~ Command `ProCmdOduiDsfCopyGeom`;

mapkey az @MAPKEY_LABEL拭除文件;~ Select `main_dlg_cur` `MenuBar1`1  `Windows`;\

mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\

mapkey(continued) ~ Activate `main_dlg_cur` `Windows.psh_win_close`;\

mapkey(continued) ~ Command `ProCmdModelEraseNotDisp` ;~ Activate `file_erase_nd` `ok_pb`;

mapkey cs @MAPKEY_LABEL(参数);~ Command `ProCmdMmParams` ;\

mapkey(continued) \~ FocusIn `relation_dlg` `ParamsPHLay.ParTable`;

mapkey cg @MAPKEY_LABEL(关系);~ Command `ProCmdMmRels` ;\

mapkey(continued) \~ FocusIn `relation_dlg` `RelText`;

mapkey ac @MAPKEY_LABEL(删除文件旧版本);~ Command `ProCmdFilePurge` ;;

!-----------------工程图编辑-------------------------------------------------------------

mapkey fa @MAPKEY_NAME创建一般视图;~ Command `ProCmdDwgViewGen`;

mapkey fb @MAPKEY_NAME工程图标注;\

mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgCrStdNewRefDim.dwg`;

mapkey fc @MAPKEY_NAME显示与拭除;~ Command `ProCmdDwgShowErase`;

mapkey fe @MAPKEY_NAME(角拐);~ Command `ProCmdDwgDtlMakeJog`;

mapkey fv @MAPKEY_NAME(对齐尺寸);~ Command `ProCmdDwgAlignDims`;

mapkey fm @MAPKEY_NAME(注释);~ Command `ProCmdDwgCreateNote`;

mapkey fz @MAPKEY_NAME(开/关移动视图);~ Command `ProCmdDwgLockViewMovement` 1;

mapkey ' @MAPKEY_NAME(选取项目);~ Command `ProCmdObjActUI` 1;

!-----------------关闭proe--------------------------------------------------------------

mapkey am @MAPKEY_NAME(关闭);~ Close `main_dlg_cur` `main_dlg_cur`;\

mapkey(continued) ~ FocusIn `UI Message Dialog` `yes`;~ Activate `UI Message Dialog` `yes`;



附件:config2012.rar
  评论这张
 
阅读(507)| 评论(1)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017